'Standard' Size Cast Lug Sets



 		  

 

 



 
 
 



 

 

102 Series. Long Point.

LT102R-1. 31.7x25.4mm. 71°.
LT102R-2. 31.7x25.4mm. 72°.
LT102R-3. 31.7x25.4mm. 73°.*

LD102R-0. 31.7x28.6mm. 60°.
LD102R-1. 31.7x28.6mm. 61°.*
LD102R-2. 31.7x28.6mm. 62°.

LS102R. 28.6x25.4mm. 74°.*

S-LS/LT/LD102R Stainless
Version, ‘*’ These angles
 		 Nash Cast Lugs

Top Lug. 74°.
31.7x25.4mm.

Bottom Lug. 60°.
31.7x28.6mm.

Seat Lug. 74°.
28.6x25.4mm.



 
300 Series. 'Arrowhead'
 
LT300R. 31.7x25.4mm. 73°.

LD300R. 31.7x28.6mm. 60°.

LS300R. 28.6x25.4mm. 73.30°.
for 10.5mm Seat Stays. - 45°.
E.g. Columbus EL0415..101
Double Taper

S-LS/LT/LD300R Stainless Set


 		 302 Series Fleur-De-Lys

LT302R. 31.7x25.4mm. 73°.
LD302R. 31.7x28.6mm. 60°.
LS302R. 28.6x25.4mm. 73.30°.
For 10.5mm Seat stays.
E.g. Columbus EL0415.101
Double Taper.


S-LS/LT/LD302R Stainless Set


 
 

 

    

 

 

 

 
 

 

  
Aries/494 Series

494 Top Lug 31.8x25.4mm 72°
Bottom Lug 31.8x28.6mm 60° 

Aries Seat Lug 28.6x25.4mm. 74°
 

 

 

  

 

Other 'Standard' Size Cast Seat Lugs

 

 

  

 

  

 
E700. Seat Lug. 73.30°.
28.6x25.4mm.



.
 		 LS22-9 For 28.6mm.x 25.4mm.x16mm.
Angle 73.30x49.10°.
Suitable for C57 Wishbone.


 
LS106RS
28.6x25.4x10.5mm. Angle 73.30°.

Any angle seat stay insertion.
For Double Taper Seat Stays

 


Partially 'Oversize' Cast Lug Sets



 


200C Series

LT200C-1. 31.7x28.6mm. 71°.
LT200C-2. 31.7x28.6mm. 72°.

LD200C-1. 31.7x28.6mm. 61°.
LD200C-2. 31.7x28.6mm. 62°.

LS200C-2.    28.6x28.6mm 72°.
LS200C-3.28.6x28.6mm 73.30°
S-LS200C-3 As above in Stainless

 



'Oversize' Cast Lug Sets




 		  
 


 


 
 
204 Series - Long Point

LT204C-2. 31.7x28.6mm. 72°.
LT204C-3. 31.7x28.6mm. 73°.
LT204C-4. 31.7x28.6mm. 74°. *

LD204C-0. 31.7x31.7mm. 60°. *
LD204C-2. 31.7x31.7mm. 62°.

LS204C. 28.6x28.6mm. 74°. *

S-LT/LD/LS204C set
Stainless Steel. Angles see *.
 

518 Top Lug.  31.7x28.6mm. 72°.
 
518 Bottom Lug 31.7x31.7mm. 60°





.

T516 Bottom Lug
31.8x31.8mm. 60°
Ergo Adjuster Bosses
 M5 Threaded.
Close match for 518 Top Lug, perfectable with a small
 amount of filing.

LS200C-2. 28.6x28.6mm 72°.
LS200C-3. 28.6x28.6mm. 73.30°
S-LS200C-3 As above in Stainless

 		 517 Top Lug 31.7x28.6mm 72°.
          Bottom Lug 31.7x31.7mm 60°


514B Seat Lug 28.6x28.6mm  73°







 

 
 



 
 


205 Series Arrowhead Type

LT205R. 31.7x28.6mm. 73°.

LD205R. 31.7x31.7mm. 60°.

LS205R. 28.6x28.6mm. 73.30°.
For 10.5mm. Seat Stays - 45°


E.g. Columbus EL0415..101
Double Taper
 

 P2 Series(Artisan) - Customizable

P2 Top Lug 31.7x28.6mm 73°
Bottom Lug 31.8x31.8mm 58.5°
Seat Lug 28.6x28.6mm 73°

P2INOX - Stainless Version

Supply Worldwide except USA

Newvex Lugs


Newvex Top Lug 31.7x28.6mm 73°
Bottom Lug 31.7x31.7mm 59°
Seat Lug 28.6x28.6mm 73°

NEWVEXINOX Stainless Version

 

 

L5 Lugs for Sloping Top Tube

L5 Top Lug 31.7x28.6mm 78°.
Bottom Lug 31.8x31.8mm 60°.
Seat Lug 28.6x28.6mm 79°.6° Slope  
L5INOX Stainless Version

Specification Sheet Download

Now Supplying Worldwide
 




 		  

 
 





 

D50/60/70 Fleur de Lys Type

D60. Top 31.7x28.6mm. 73.30°

D70. Bottom 31.7x31.7mm. 59.30°

D50. Seat 28.6x28.6mm.  73.30°

SD50/60/70 As above in Stainless

FDL Top Eyes available.
 		 Nuovo Ritchie Lugs

Also available in Stainless

 

 

 

 

 

Other 'Oversize' Cast Seat Lugs.



 

LS106RO 28.6x28.6mm. Angle 73.30°. Seat Stay ports for 10.5mm double taper seat stays E.g. Columbus EL0415..101, any angle seat stay insertion.
S-LS106RO Stainless Version
 		 P23. 28.6x28.6mm. 73.30° angle.
14mm Seat Stay Ports



 		 LS02F-6. 28.6x28.6mm. 74° angle.
Seat Stay Ports for 14mm. seat stays



 

 

 

Cast Lug Sets for 28.6mm (1 1/8") Steering Column. Suit Columbus CYRK18600 Head Tube|

 

  


LT07 Top Head Lug.
36x28.6mm. 74°
S-LT07 Stainless version

LD07 Bottom Lug.
36x31.7mm. 60°
S-LD07 Stainless Version

LS204C. 28.6x28.6mm. 74°.
 S-LS204C Stainless Version




 
LT04-8  Top Head Lug.
 36x31.7mm. 74°
S-LT04-8 Stainless Version

LD04 Bottom Head Lug. 61°
36x34.9mm. Slightly shorter Point than LT04-8 above
Also 64°
S-LD04 Stainless Version in 61°

F40 Seat Lug. 73.30°.
31.8 x 31.8 x 16mm
F40S Stainless Version.



 
LT03 Long Point Top
Head Lug. 31.7x31.7mm. 73.30°

LD03 Long Point Bottom
Head Lug. 31.7x34.9mm. 60°

Suggested Seat Lug to match F40 shown here to the left.








 

P3 Lugs for Sloping Top Tube

P3 Top Lug 36x31.7 79°.
Bottom Lug 36x35mm 60°.
Seat Lug 31.8x31.8mm 79°. 6° Slope  

P3INOX Stainless Version

Also suitable for MTB.

Specification Sheet Download

Now Supplying Worldwide
 




 		  

 
 





 

C50/60/70 Fleur de Lys Type

C60. Top 36x28.6mm. 73.30°

C70. Bottom 36x31.7mm. 59.30°

C50. Seat 28.6x28.6mm. 73.30°

SC50/60/70 As above in Stainless

FDL Top Eyes available.
 

 

ATB Cast Lug Sets



 


 
 
 

 

108 Series - Long Point


LT108M Top Lug. 37x31.7mm.
Angle 77.30°.

LD108M Bottom Lug. 37x34.9mm.
Angle 66.10°

LS108M Seat Lug 31.7x31.7mm
Angle 79.30°
Seat Stay port
16mm round
Angle 54.36°


Haden Pressed Seat Lug available
if the shot in ports are not suitable.
See also F40 above.

C800 Series.

C811. Top Head Lug.
37x31.7mm.
Angle 74°.

C821. Bottom Head Lug.
37x34.9mm.
Angle 66°.

C801. Seat Lug.
31.7x31.7mm
Angle 73.5°.





 		 C70 Series.

C71-MT. Top Tube. 31.7x28.6mm. 71°.


C72MT. Down Tube. 31.7x31.7mm. 66°.


LS200C-2 Seat Lug. 72°.
LS200C-3 Seat Lug. 73.30°.
28.6x28.6mm





 

 

Tandem Cast Lugs
 


 
C839.Centre Lug. Gents/Ladies
31.7 Top/28.6mm Seat Tube		 C841. Rear Top Lug Ladies.
31.7 Top/28.6mm Seat Tube


 

Cast Seat Tube Collars/Seat Tube Reinforcements



 
 
 
LS01N-2B Seat Tube Collar.
28.6mm. with extended back.
S-LS01N-2B Stainless Version

 		 LS01-3B for 31.7mm. tube.
S-LS01-3B Stainless Version.
LS01-0B for 30mm. tube.

 		 Stainless:
 S-LS01F-9A Diameter 25.4mm.
S-LS01F-1A Diameter 28.6mm.
S-LS01F-2A Diameter 29.8mm.
S-LS01F-3A Diameter 31.7mm.
S-LS01F-5A Diameter 35mm.
Accept M6 Screw		 C84. For 31.7mm. Seat tube.



 


 		    

C759. for 28.6mm.Seat Tube.
Boss 42mm wide. 8.4mm hole.

 
C83. Seat Clamp. 31.7mm. Diameter.


 



 		  


Other Sleeves/Clamps



       

 

Machined Sleeves for 28.6mm
Seat Tube
370 Height 68mm


Also 372LENGTH Sleeve tubing
in 1 metre length


 
Aluminium Seat Clamps for Externally Butted Seat Tubes
S07 Diameter For 29.4mm.
S08 Diameter 29.8mm.

Black Anodized Finish



 

 

Special Cast Lug Sets


MAX Lugs for Columbus MAX Tubing

Top Lug Angle: 74°.
Bottom Lug Angle: 59.30°.
Seat Lug Angle: 74°.
 


 

Pressed Lugs




 

 		  


 
 		  
 

 

 
Thron Head Lugs. Oversize.

Top Lug 31.7x28.6mm. 73°.
Bottom Lug 31.7x31.7mm.60.30°
Professional Seat Lug 28.6mmx25.4mm. 73°.

 No Ears. No Cut Outs
 


 

 

Stem Lug Kits



 
S-LG100 Stainless steel Fleur de Lys Stem Set for 25.4mm Steerer.
Two lug kit & teardrop stainless tube for joining. Fits 26mm. 17° angle.
 
S-LG302 Stainless steel Fleur de Lys Stem Set for 25.4mm Steerer.
Two lug kit & teardrop stainless tube for joining. Fits 26mm. 17° angle.
Click here for a picture of the finish possible with this item.
 



 		  

S-L2 Stainless steel Fleur de Lys Stem Lugs. Sized For 28.6mm Steerer, can be used with a 25.4mm steerer utilizing a suitably sized sleeve tube.
Suitable for a 28.6mm Connector tube of suitable material and gauge.
Stem Rise: ± 5.0°
Bar Clamp Diameter: 31.7 mm